How to Charge Your RegenaLight Mask

Charging your mask correctly ensures it performs at its best every session. Here's everything you need to know.

Step-by-Step Charging Instructions

Power the mask off completely before connecting it to charge. Do not turn the mask on while it is plugged in — this can interrupt the charging process.
Use the included USB charging cable and connect it to a wall adapter. A direct wall outlet gives the most consistent charge; laptop USB ports or power banks may charge more slowly or inconsistently.
Look for the indicator light. Once plugged in, you'll see the light blinking — this means your mask is actively charging.
Wait for a solid (steady) light. When the blinking stops and the light becomes solid, your mask is fully charged and ready to use.
Unplug before use. Disconnect the cable before powering the mask on for your session.

Charge time varies depending on the adapter and cable you use. A typical full charge takes around 1–2 hours using a standard wall adapter.
If the charging indicator light doesn't appear when you plug in, try a different adapter or cable. Not all USB adapters deliver consistent output.
For best results, charge your mask after every few sessions rather than waiting until it's fully depleted.

No indicator light at all? Try a different cable and wall adapter first — this resolves most charging issues.
Charging seems to take very long? Switch to a wall outlet if you're currently using a laptop or power strip.
Mask won't turn on after charging? See our article: My RegenaLight Mask Won't Turn On — Troubleshooting Guide.

If you've tried the steps above and your mask still isn't charging properly, reach out to us at hi@regenalight.com — we're happy to help.